Monday, February 10, 2014
the dome part 2
in this photo, you can see pete, the mason brother in law, of vermont brick ovens, on the left, and trevor, admiring the collapsing mechanism. if you enlarge the photo, (click it), theres a handwheel on the vertical stem, and when you turn it, the hub drops and the ribs can be removed one at a time through the oven door, or more likely from the collapsed pile of parts.
when hes ready, well be helping pete set it up for his current project. hes currently working on the soldier course that stands vertically around the 72" diameter .. heres a photo of that in the works.
in case you missed the first post, itll look like this when its done.
well, it was quite a trip getting this project together .. lots of head scratching, lots of glue, (over a gallon) and some sanding and bondoing ... here are some more photos of the process ...
early on, with the glue up form still in use .. see this link for other early photos
here were getting the shim blocks (later knocked out to collapse the form) figured out ...
in the end, we made two different versions ..
sanding and fitting the rough glued pieces .. it aint perfect, but there arent any
cracks that a half a brick can fall through ...
tah dah .. on to bondo and paint
the holes were from the ten thousand screws we used to make the five layers of bending plywood do what they had absolutely no interest in doing, which is form part of a sphere.
a previous vermont brick oven project in manchester, for which we made a different form
that was a lot more complex and time consuming to set up than this one ..
we realized as we were packing it up .. damn! we missed our chance. we shoulda painted
the north pole, hudson bay, and sweden to alaska on it ...
i will NOT be going into the wood globe business ..... all for now.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment